Super Synthetic Enamel Interior

Image

Rubilux Super Synthetic Enamel is a high gloss air drying enamel based on synthetic resins and high weather resistant, Light fastness pigments, for decoration and protection of all internal, External surfaces and meets the performance requirements of IS 2932.This high quality high gloss enamel has very good colour resistance, water resistance and exterior durability. On account of the high covering capacity and ease of brushing, it is ideally suitable for painting of bus bodies, trucks and refinishing of tractors, earth moving equipment and similar items and also as a decorative finish for architectural where a high quality finish is called for. Due to ease of brushing and good flow it is ideal for sign board painting.

Rubilux Super Synthetic Enamel is a versatile product which can be used for both decorative and Industrial Purpose where Quality Stands. It is available in different Pastel,. Light and dark hues Suitable for any type of application

TECHNICAL DATA

Finish: Glossy and smooth

Colour: Brilliant White, Black and wide range of colour as per shade card

Drying time: Touch Dry 1 hr, Tack free Dry 3 Hours, Hard Dry-over night

Gloss: At 45 Degree H 75 and above

Coverage: By Brush - 16 to 20 m2 per ltr per coat

               By Spray - 10 to 16 m2 per ltr per coat

Consistency of Supply: 110+ 10 sec in ford cup number 4

SURFACE PREPARATION

The surface to be painted is first cleaned or treated appropriately such that the surface is free from dust, dirt, grease, rust , moisture and loose particles etc., Use Rubilux Zinc Chromate Red Oxide Metal Primer for metal surface and Wood Primer for wood for best result. Before applying finishing Coat the Primed surface should be sanded. To get good coating film thickness of 50 microns or 2 mils two coats is recommended.

APPLICATION DETAILS, METHOD

By brush as supplied or by spray after dilution with Enamel Thinner.2 coats is recommended after over night drying between coats

DILION RATIO: For Air Spray - 5 to 15%

                        For Brushing - 0 to 10%

RECOATING INTERVALS: minimum 4 to 6 hour